Publicité
Les langues disponibles
Les langues disponibles
Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top @:
Scroll with < >
Set with + -
Leave with t 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Settings
Switching on the appliance
for the first time
Language
Time format
Time setting
Water hardness
Rinse aid disp.
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
setting.
Change the setting as follows:
1.
Open the door.
Switch on ON/OFF switch (.
2.
Press Info button ( 8 for 3 seconds until the
3.
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
Keep pressing button > )* until the required setting
4.
is displayed.
5.
Make the selection with setting buttons + - X.
6.
Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
Factory setting
Infotext
by pressing Info button (
American English
Language selection.
24h
12h or 24h.
12:00
Set the current time.
°E 0
Setting water hardness. When using Multitabs, select the
lowest setting.
Level 5
Amount of rinse aid affects drying. When using Multitabs,
select setting 0.
Change the setting as follows:
1.
Keep pressing button > )* until the required setting
is displayed.
Make the selection with setting buttons + - X.
2.
Press and hold the Info button ( 8 for 3 seconds.
3.
The selected setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
en-us
Getting Started
13
Publicité
