Publicité
Les langues disponibles
Les langues disponibles
1. Important details for your information / 2. A quick overview for you
Read these operating instructions without fail before installing and starting
the pressure transmitter.
1. Important details for your information
Keep the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications. If
questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.wika.de / www.wika.com
„
The product data sheet is designated as PE 81.67
„
Contact WIKA for additional technical support (+49) 9372 / 132-8976
„
With special model number, e.g. PSD-30000, please note specifications in the delivery note.
If the serial number gets illegible (e.g. by mechanical damage or repainting), the retraceability
of the instrument is not possible any more
WIKA pressure switches s are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment. Our environmental manage-
ment system is certified to DIN EN ISO 14001.
Use of the product in accordance with the intended use PSD-30:
Use the pressure switch (indoor and outdoor) transform the pressure into an electrical signal.
Knowledge required
Install and start the pressure switch only if you are familiar with the relevant regulations
and directives of your country and if you have the qualification required. You have to be
acquainted with the rules and regulations on measurement and control technology and
electric circuits, since this pressure switch is „electrical equipment" as defined by EN 50178.
Depending on the operating conditions of your application you have to have the correspon-
ding knowledge, e.g. of aggressive media.
2. A quick overview for you
If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some
short safety instructions and important information on your product and its starting. Read
these chapters in any case.
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
GB
PSD-30
3
Publicité
