Publicité
Les langues disponibles
Les langues disponibles
7. Starting, operation
Keys and functions
Display-Mode
short press:
INFO
Display units
long press:
Run-through Parameter Info
1. UNIT + unit
2. SP1 / FH1 + value
3. RP1 / FL1 + value
4. SP2 / FH2 + value (optional)
5. RP2 / FL2 + value (optional)
6. LOW + value
7. HIGH + value
8. TAG + value (Only display when value set)
short press:
display units
MENU
long press:
Switch to Programming Mode
If the password is set to <> 0000, a pass-
word will be requested. If authentication is
successful, then it enters the Programme
Mode, otherwise it reverts to Display Mode.
short press:
display units
-
INFO
+
MENU
12
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio PSD-30
Programming-Mode
short press:
- Menu up
- Increase parameter value
long press:
- Menu up
- Increase parameter value
short press:
- Menu down
- Decrease parameter value
long press:
- Menu down
- Decrease parameter value (Increment rate is time dependent)
long press (during Restart, keep pressed)
short press:
- Select Menu Item
- Confirmation of the entry (Parameter value)
short press (both keys at the same time):
Return to Display Mode
GB
Publicité
