Publicité
Les langues disponibles
Les langues disponibles
7. Starting, operation
Parameter
Description
0SET
Zero Point adjustment (3% of span) see page 29
DISM
Display value in Display Mode
ACT = Current System Pressure, LOW, HIGH = Minimum, Maximum System Pressure, OFF = Display off;
SP1/FH1 = Function switch point 1, RP1/FL1 = Function reset point1,
SP2/FH2 = Funktion switch point 2, RP2/FL2 = Function reset point 2
DISU
Display-Update 1, 2, 5, 10 Updates/Second
DISR
Display rotate 180°
RHL
Clear the Min- and Max-value memory
PAS
Password input, 0000 = no password
Password input Digit by Digit
TAG
Input of a 16-digit alphanumeric Measuring Point number
Error display
Error
Description
ATT1
On changing the Switch Point the system automatically reduces the Reset Point
ATT2
Zero Point adjustment error, current pressure is outside the limits
ATT3
Password entered for Menu access is incorrect
ERR
Internal error
OL
Overpressure, measuring range exceeded > approx. 5% (Display blinks)
UL
Underpressure, under measuring range < approx. 5% (Display blinks)
Menu (Programming and Factory Setting)
Display-Mode
Long press on Menu Key
Programming-Mode
SP1 / FH1
RP1 / FL1
SP2 / FH2
RP2 / FL2
14
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio PSD-30
Acknowledgement of an Error Display by pressing the „Enter" key.
(Min: LLR + 0.5%
value
(Min: LLR
value
(Min: LLR + 0.5%
value
(Min: LLR
value
Factory Setting:
Max: ULR)
Instrument Nominal Pressure
Max: SP1 - 0.5%)
Instrument Nominal Pressure - 10%
Max: ULR)
Instrument Nominal Pressure
Max: SP2 - 0.5%)
Instrument Nominal Pressure- 10%
GB
Publicité
