Signature SFDOOR474XNFE Manuel D'utilisation page 46

Horizontal mounting
The unit must be set up horizontally to minimize vibration. To set the
unit horizontally, it must be standing upright, with its two adjustable
feet in stable contact with the floor. You can also adjust the
horizontal setting by unscrewing the front adjustable feet in the
appropriate position (use your fingers or an appropriate wrench).
FIRST USE
Before the use of the refrigerator, remove all the packages,
including bottom cushion and foam pads and rubber belts in the
refrigerator.
Adjust the feet and clear the outside and inside of the refrigerator
with warm cloth.
Do not start the refrigerator immediately after vertical placement.
Only start it after around 4 hours standing to ensure its proper
operation.
To prevent damage to the power cord and any consequence
incidents, the power cord should be not covered by the refrigerator
or other objects. Before switching on the refrigerator, please check
the voltage range of refrigerator carefully if the same as that of the
power supply.
When the refrigerator is first installed, allow it stabilize at normal
operating temperatures for 2-3 hours prior to filling it with fresh or
frozen foods.
If operation is interrupted, wait for 5 minutes before restarting.
- 9 -