Publicité
Les langues disponibles
Les langues disponibles
TRANSPORT AND HANDING
When transportation, hold the base and lift the refrigerator carefully
with an angle inferior at 45 degree. Never hold the door handle
as support. Never place it upside down nor horizontally. Push
refrigerator on its basis and place it thanks to its roller feet.
INSTALLATION
This refrigerating appliance is not intended to be used as a built-in
appliance.
To fix stably, the appliance must be placed on a flat and solid
surface. It should not be laid on any soft material. Choose a
location where there is no heat source. Keep the refrigerator away
from direct sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where there is no corrosive
air.
Important!
There must be good ventilationaround the refrigerator to allow
heat dissipation, high efficiency and lowpower consumption.
Therefore, there must be enough spacearound the freezer. It is
recommended to leave a space of 100 mm betweenthe back of
the refrigerator and the wall, at least 100 mm on each side and at
least 100 mm above.
100mm
100mm
100mm
- 8 -
Publicité
