Triangle CAPELLA Mode D'emploi Et Garantie page 87

7.A SETTING UP THE STEREO HUB
1.
3.
4.
1.Place the batteries in your remote control
using the supplied key.
Ensure that the polarity is correct.
2.Screw the antenna on the Stereo Hub.
3.Select the right plug for your AC outlet.
4.Then connect the power cable between your
Stereo Hub and your AC outlet
.
Do not connect the speaker power cables
at this time.
2.
SERVICE
5.
5.The Stereo Hub begins its startup sequence.
Please wait until it is finished. This is how it works: the
WiSA LED remains switched off for 50 seconds, then
flashes for 20 seconds before switching off again.
The end of the startup sequence is confirmed once
the WiSA LED switches off. You can now pair your
remote control.
.
WISA
PAIRING
14 EN