9.F ROOM EQ
When taking measurements, follow the recommendations below:
Move around the room with the microphone to cover the entire room, positioning it at
Î
different heights.
Keep within 1.5m of your speakers. Make circular movements with your arm.
Î
Do not get in between the speakers and the microphone.
Î
Take measurements for 60 seconds. The test can be stopped earlier if you have covered the entire
Î
room.
Click on "Got it!".
« Lower roll-off frequency": System stop frequency (low frequency at
-6dB). For your CAPELLA system, we recommend setting it to 35Hz, as
the analysis will focus only on frequencies that can be reproduced by
your system.
"Room EQ target function": Each room has its own characteristics, so
you can extend the low-frequency response. If you do not experience
too much resonance, you can move the slider to the right. On the other
hand, if you do experience resonance and your room does not "absorb"
it, then move the slider to the left;
Then click on
30
EN