Publicité
Les langues disponibles
Les langues disponibles
9.G MANUAL EQ
•
Save your setting in your "Presets" by pressing and holding the number 1/2/3 if you are satisfied with
your setting
6dB highpass :
The "6dB highpass" defines a highpass filter with a gentle slope at 6dB/Oct. This means setting the fre-
quency at which your speaker will start to operate in the low frequencies, with a softer cut-off on frequencies
below the set frequency than a 12dB/Oct filter. This setting is very useful for adapting your speakers to the
dimensions of your room.
The CAPELLA speakers, especially thanks to their advanced DSP programming, have a high capacity for
low-frequency restitution. They perform best when adjusted to their environment. We recommend applying
a 50Hz filter and then gradually increasing it in 5Hz steps to find the cut-off that best suits your listening room.
The low frequencies should be firm and tight, without excessive drag.
You can also set a filter around 90/120Hz if your speakers are coupled with
a subwoofer.
39
EN
Publicité
