Triangle CAPELLA Mode D'emploi Et Garantie page 143

APPENDIX 2: ZEN MICROPHONE
Installation :
1. Make sure your CAPELLA system is On and connected to the Wi-Fi network.
2. Switch on your ZEN microphone by simply pressing the "Action" button (make sure it is properly
charged beforehand). The white LED flashes rapidly, indicating that the microphone is ready for
setup.
(* if not, press and hold the "Action" button for 10 seconds to reset the microphone)
3. Start your CAPELLA app.
4. Confirm the connection of a new device on the app.
5. Select your Wi-Fi network and enter the corresponding Wi-Fi password. Then press "CONNECT".
6. The app restarts. Select your CAPELLA system and go back to the EQ page.
7. The microphone
the EQ page.
8. Refer to page 28 to make the "Room EQ" measurements.
9. The status of your ZEN microphone is available in the app settings. You can rename it, reset it,
check its battery level and check the latest update.
*The microphone switches off automatically after 10 minutes of inactivity.
4.
appears in the top right-hand corner, next to the parameters icon
5.
6.
7.
on
70 EN