Triangle CAPELLA Mode D'emploi Et Garantie page 78

1. INSTALLATION PRECAUTIONS / WARNINGS
INSTALLATION PRECAUTIONS
BEFORE THE INSTALLATION
Before making any connections, make sure the speakers and the Stereo Hub are switched off.
Always disconnect power cables from the mains before removing or connecting cables. Do not
plug them back in before all connections are made.
MOVING THE SYSTEM
Always remove the power cord and disconnect the cables between all components when moving
the device. This will prevent a short-circuit or the damage to the plugs or connection cables.
BEFORE SWITCHING ON THE DEVICE
Check one last time if all the connections are correct.
LOCATIONS TO AVOID
Install your speakers in a temperate place and avoid humid locations or direct sunlight.
RECYCLING
Protection of the environment: your products contain valuable materials which can be recovered
or recycled. Take them to the appropriate collection points.
WARNING
Always use the product in an environment where the temperature is between -10°C and 40°C, otherwise your
product may be damaged.
For the following devices:
Product Name: CAPELLA Brand: TRIANGLE
TRIANGLE Hi-Fi (Email: capella@trianglehifi.com) declares that this CAPELLA product, Models: CAPELLA:
TEA8_BL, TEA8_BU, TEA8_BW, TEA8_BX, TEA8_BY, TEA8_BZ, TEA8_CA
Tested in accordance with the Radio Equipment Regulations 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696).
The full text of the UK Declaration of Conformity is available here: https://www.trianglehifi.fr/pages/declaration-
conformite-uk
The RF distance between body and product is 0mm.
Bluetooth version: Bluetooth V4.2 (Only EDR) Frequency range: 2402-2480MHz
Maximum RF output level : 4dBm (EIRP)
2.4GHz
Frequency range: 2464MHz Receiving
5 EN