Triangle CAPELLA Mode D'emploi Et Garantie page 144

APPENDIX 3: LEFT AND RIGHT SPEAKER ASSIGNMENT
1.
1.Press and release three times quickly the "PAI-
RING" button on the back of the Stereo Hub until
the WiSA LED starts flashing rapidly. The "stereo
configuration mode" is activated when you hear a
sound like "psst!" on one of your speakers.
2.Press the button on your remote control corres-
ponding to the sound-emitting speaker, as shown
in the diagram. One LED lights up for the left spea-
ker (A), then nine for the right speaker (B) on the
remote control
A
Speaker
LEFT
3.Press the left or right source selection arrow to
switch to the second speaker, then repeat the ope-
ration on the remote control.
4.Once the left and right channels have been de-
fined, exit the "Stereo configuration mode" by
pressing the button
B
Speaker
RIGHT
.
71 EN