Triangle CAPELLA Mode D'emploi Et Garantie page 137

11. CONNECTING SOURCES WITHOUT THE STEREO HUB
11.A CONNECTION VIA RCA SOURCE
Use the "pre-amp" output of your integrated amplifier or the "amp" output of your preamp:
Connect the source's RCA cables to the "Line IN" input of the speakers.
Î
The red RCA indicates the right speaker, the black or white RCA the left speaker.
Î
Your system is ready to operate.
Î
In this configuration, EQ settings will no longer be available from the app.
When a connection is detected on the RCA connectors, the speaker automatically switches to this input,
and the status LED on the speaker turns green.
Your source needs to have built-in volume management
so you can control it.
DROITE
RIGHT
USER MANUAL
64 EN