Publicité
Les langues disponibles
Les langues disponibles
9.F ROOM EQ
With your microphone, start taking measurements in different parts of the room, as described above.
Î
Then click on "Begin", the LED on your ZEN microphone turns red. The speakers start producinga
Î
constant pink noise, and you have 60 seconds to take as many measurements as possible.
If you think you have covered the entire room, you can stop the operation as soon as the "Stop" in-
Î
dicator turns white.
Once the operation is complete, a red frequency response from the speakers in your room appears.
Î
These disturbances on the curve, which is supposed to be linear, are mainly linked to your room. We
are going to correct them.
Click on "Calibrate". In yellow, you see the frequency response corrected by the Room EQ. The diffe-
Î
rence between the two curves can be striking.
Click on "Finished" to finalize the measurements with the Room EQ.
Î
By clicking on the small white circle below the Room EQ icon, you can enable or disable this setting
Î
when listening. You will notice a significant improvement of your listening experience.
31
EN
Publicité
