Wohler VIS Serie Mode D'emploi page 13

6 Home-Function
+
7 Localisation
8 Maintenance
The home function ensures the camera head is
automatically aligned to a straight position, ensur-
ing the camera "looks straight ahead".
Moreover, when the user presses the HOME key,
the camera head aligns itself so that the display is
parallel with the ground above (this function is
deactivated if the camera head faces 90° upwards
or downwards. Under these circumstances, the
optics can only be guided forwards).
•
To activate the home function, press the
SHIFT key and then the HOME key on the
keyboard of the camera system.
The Wöhler camera head Ø 40 mm is equipped
with a transmitter coil that transmits signals.
These signals can be located by the Locator Wöh-
ler L 200. This way it is possible to locate the ex-
act position of the camera head in the pipe sys-
tem.
NOTE!
The transmitter hast o be activated in the camera
menu (setup-menu).
Clean the lens only with a clean damp cloth but
never with cleaning agent.
Home-Function
13
EN