Gardeo GTDTAL58HP5TBS-CM Traduction Des Instructions Originales page 55

Push handle
Drive lever
Instruction for grass bag assembly
1. Put out the grass box and metal bracket from the packing box
2. Put the metal bracket into the grass box, keep the handle outside.
3. Fix the plastic jacket in the metal bracket.
OPERATION
Brake lever –must be held down to the handle to start the engine. Release to stop the engine.
Starter handle - used for starting engine.
Drive control lever - used to engage
Power-propelled forward motion of lawn mower.
Range of application
①.Cutting up and depositing the grass on the lawn
ƒ \ .Cutting up and colle
. ƒ ] Cutting up and ejecting backwards.
Mulching
1. Installation and removal of the accessories must always be take place with switched off engine.
2. Please make sure the stability of the attached mulching accessories after installing.
3. For mulching plate, you only allowed use the accessories from original factory
4. Always avoid clearing away an excessive quantity grass so that the mower mechanism and the
engine are overloaded. It will helpful to pass excessive grass if reduce the speed of self-propelled.
Assembly
Put the baffle plate and raises (1), aim at the (2)
engage
Disassembly
Brake lever
cted in the grass catcher.
The sensitivity of clutch lies on
tightness-scale of nut.
round hole underside, fax up the autolocking hook
55