Gasoline is extremely flammable, and gasoline vapor can explode, causing
serious injury or death. Use extreme care when handling gasoline. Keep out
of reach of children.
Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks in
the area where the engine is refueled or where gasoline is stored. Avoid repeated or prolonged contact
with skin or breathing of vapor.
After refueling, tighten the fuel tank cap securely. If any fuel was spilled, make sure the area is dry
before starting the engine.
MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and original
performance of the machine unchanged in time.
1)For the gasoline engine maintenance, Please read engine manual.
2) Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Regular maintenance is essential for safety and performance.
Never store the equipment with fuel in the tank inside a building where fumes can reach a open flame or
a spark or a source of extreme heat.
3)Allow the engine to cool before storing in any enclosure.
4)To reduce the fire hazard, keep the engine; exhaust silencer, battery compartment and petrol
storage area free of grass, leaves, or excessive grease. Do not leave containers with grass cuttings
in rooms.
5)Replace worn or damaged parts for safety ,For reasons of safety, do not use the equipment with worn
or damaged parts. Parts are to be replaced and not repaired. Parts that are not of the same quality can
damage the equipment and be dangerous for your safety.
10)If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
11)Wear strong work gloves when removing and reassembling the blade.
12)Check the blade's balance after sharpening.
13)Check the self-closing guard and grass-catcher frequently for wear and deterioration.
10)Whenever the machine is to be handled, transported or tilted you must:
- wear strong working gloves;
- grasp the machine at the points that offer a safe grip, taking account of the weight and its distribution.
Blade
Ref : Y02202
58