Behringer XENYX X1204USB Manuel D'utilisation page 84

84
XENYX X1204USB/1204USB User Manual
5. Speci cations
Mono Inputs
Microphone Inputs (XENYX Mic Preamp)
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 source resistance
@ 50 source resistance
@ 150 source resistance
Frequency response
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD + N)
Line Input
Type
Impedance
Gain range
Max. input level
Fade-Out Attenuation 1 (Crosstalk Attenuation)
Main fader closed
Channel muted
Channel fader closed
Frequency Response
Microphone Input to Main Out
<10 Hz - 90 kHz
<10 Hz - 160 kHz
Stereo Inputs
Type
Impedance
Max. input level
XLR, electronically balanced,
discrete input circuit
-134 dB / 135.7 dB A-weighted
-131 dB / 133.3 dB A-weighted
-129 dB / 130.5 dB A-weighted
<10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
+10 to +60 dB
+12 dBu @ +10 dB gain
approx. 2.6 k balanced
110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
0.005% / 0.004% A-weighted
¼" TRS connector electronically balanced
approx. 20 k balanced
approx. 10 k unbalanced
-10 to +40 dB
30 dBu
90 dB
89.5 dB
89 dB
+0 dB / -1 dB
+0 dB / -3 dB
¼"TRS connector, electronically balanced
approx. 20 k
+22 dBu
EQ Mono Channels
Low
Mid
High
EQ Stereo Channels
Low
Mid
High
Aux Sends
Type
Impedance
Max. output level
Stereo Aux Returns
Type
Impedance
Max. input level
Main Outputs
Type
Impedance
Max. output level
Control Room Outputs
Type
Impedance
Max. output level
Headphones Output
Type
Max. output level
DSP
Converter
Sampling rate
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
¼" TS connector, unbalanced
approx. 120
+22 dBu
¼" TRS connector,
electronically balanced
approx. 20 k bal. / 10 k unbal.
+22 dBu
XLR, electronically balanced
approx. 240 bal. / 120 unbal.
+28 dBu
¼" TS connector, unbal.
approx. 120
+22 dBu
¼" TRS connector, unbalanced
+19 dBu / 150 (+25 dBm)
24-bit Texas Instruments TM
24-bit Sigma-Delta,
64/128-times oversampling
40 kHz