HEBU medical HF 9516 Mode D'emploi page 57

HBS x-touch 300 argon BiSeal
◼
Argon gas flow setting
The gas flow can be set at an interval of 0.1 L/min to 6.0 L/min in steps of 0.1 L/min.
Different gas flows can be set for each of the functions CUT and COAG.
To set the gas flow, touch the relevant display
COAG. This will open the menu for setting the
Use the arrow keys to set the required output.
To save and return to the main menu, select
button.
8.9 Saving and accessing the program
Touching the "Program" field causes a selection of saved
programs to appear.
To select the required program touch the relevant line. The
program you are located in is highlighted in grey.
In the main menu, the number of the accessed program and
the name are displayed
To change the program name, touch the field with the name.
In our example, this is: DR MULLER. A window opens with a keypad. The maximum symbol length is
15 characters.
To save the name, press "Enter", and to quit without saving, press "Esc".
®
DR. MULLER
1
EN
- CUT or
gas flow.
the "Exit"
57