HEBU medical HF 9516 Mode D'emploi page 56

EN
8.8 Setting the operating mode and power level
◼
Operating mode
HBS x-touch 300 argon BiSeal
operating modes for monopolar cutting, three operating
modes for monopolar coagulation and four for bipolar
coagulation applications (for details, see chapter 5.2
"Overview of symbols for operating modes and settings
The selection of all modes takes place according to the
same principle. Touch the field showing the operating
modes. The selection menu then opens.
The required operating modes must be selected by
touching. To save and return to the main menu, select the
"Exit" field.
◼
Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Menu example: Power setting
(MONO1- COAG)
When the unit is next switched on, the last used settings will appear. The lock function can be used If
you want to save individual settings against changes. For more information about the lock function
see chapter 8.9 and 8.10.
56
®
has four different
"
).
Use the arrow keys in order to set the required power setting.
To save and return to the main menu, select the "Exit" field.
HBS x-touch 300 argon BiSeal
Menu example: Selection of operating modes
(MONO2 – CUT)
®