HEBU medical HF 9516 Mode D'emploi page 48

EN
7 Accessories
7.1 Accessories for the monopolar operating mode
Handles for monopolar electrodes can be connected to the unit using a 2-pin standard or ERBE plug
or using the 4 mm plug (banana plug) with only one contact.
3-pin standard plug
Neutral electrode
The connecting plug of the neutral electrode output has a diameter of 6.35 mm.
The HBS x-touch 300 argon BiSeal
contact surface. Comparison of the electrode detected by the machine and the used electrode provides
a direct indication of correct adhesion of the neutral electrode. Both single-use and reusable neutral
electrodes can be used.
HEBUmedical recommends use of the single-use safety neutral
Argon connection
The Argon connecting plug corresponds to a standard Luer lock.
48
Apply for a copy of our extensive
electrosurgery accessories catalogue today!
ERBE monopolar plug
Connecting plug for the neutral electrode
®
reliably detects neutral electrodes with undivided and divided
electrode with double divided contact surface (HF 9564)
for maximum safety!
Argon connecting plug with Luer Lock
HBS x-touch 300 argon BiSeal
Monopolar 4mm 1-pin plug
(banana plug)
®