HEBU medical HF 9516 Mode D'emploi page 37

HBS x-touch 300 argon BiSeal
2 Introduction
An electrosurgical unit is a generator used to transform electronic energy into high-frequency
alternating current (HF current).
If this current flows through human tissue, it creates heat which is used for cutting and for coagulation
of the tissue.
The HBS x-touch 300 argon BiSeal
a high safety standard and unites economy with operative flexibility.
It offers the following application modes:
For monopolar surgical use
•
Pure cut
•
Blend cut
•
Polypectomy mode
•
Cutting in water environment (TUR)
•
Soft coagulation
•
Forced coagulation
•
Spray coagulation
•
Coagulation with argon
For bipolar use:
•
Blend Cut
•
Coagulation
•
Cutting in water environment (TUR)
•
Vessel sealing, BiSeal
Benefits of the HBS x-touch 300 argon BiSeal
◼
Simple, intuitive and safe operation
◼
USB-connection for service
◼
Current terminal for optional wireless foot switch, max. 0.5 A
◼
Display-supported neutral electrode safety system helps interactively when applying the neutral
electrode
◼
Nine storage locations for individual program settings
◼
Two monopolar multifunction terminals for 3-pin standard or ERBE plug, one terminal works with
argon
◼
AutoStop function for automatic interruption of the energy supply after a certain tissue resistance
level is reached.
◼
Tone signal with scope for control of the volume, and an alarm tone in case of faults without facility
for switching off.
◼
Coloured illumination of the LCD display in red, yellow, blue or green to indicate different operating
modes or error statuses
◼
Facility for tracing output and impedance at the LCD display in the patient circuit on activation
◼
Worldwide application possible through connection scope from 100 to 260 volts, 50 to 60 Hz
◼
A successful sealing is confirmed visually and acoustically
®
®
is a versatile and compact electrosurgical unit which complies to
®
®
:
EN
37