HEBU medical HF 9516 Mode D'emploi page 42

EN
5.1 Main menu of HBS x-touch 300 argon BiSeal®
M1
M2
M3
M4
◼
21 Input for program selection, name of the program
(
◼
(22) Recognition and status of the neutral electrode
◼
(23) Settings and status from the lock, which is used to save individual programs
(see chapter 0 "
Saving the program
◼
(24) Settings and status of foot switch
◼
MONOPOLAR 1:
•
(M1) Input for changing the power level and display (CUT and COAG)
•
(M2) Input for selection of the operating mode and display (CUT and COAG)
◼
MONOPOLAR 2:
•
(M3) Input for selection of the power level and display (CUT and COAG)
•
(M4) Input for changing the operating mode and display (CUT and COAG)
◼
BIPOLAR:
•
(B1) Input for changing the power level and display
•
(B2) Input for selection of the operating mode and display
•
(B3) Selection between bipolar output 1 or bipolar output 2
◼
Argon:
•
(A1) Display of gas volume (cylinder 1 left, cylinder 2 right)
•
(A2) Activation of argon probe flushing process
•
(A3) Input for setting the gas flow volume in the CUT mode and display
42
B1 B2 B3
")
against changes
HBS x-touch 300 argon BiSeal
24
®
21
A1
23
A2
A3
A4
A5
22