Use; Functional Description; Scope Of Delivery; Technical Design - SATA graph 4 Mode D'emploi

Operating instructions SATAgraph 4
EN
they are loosened.
Point of use
■ Never use SATAgraph 4 in the vicinity of
ignition sources, such as naked flames,
burning cigarettes or non-explosion-proof
electrical equipment.
■ Only use SATAgraph 4 in well ventilated
rooms.
General
■ Never point SATAgraph 4 at human beings.
■ Comply with the local regulations for safety,
accident prevention, occupational health
and safety and environmental protection.
■ Heed the accident prevention regulations.

3. Use

Intended Use
SATAgraph 4 is used to apply paint, ink,
sprayable acrylic paint, water varnish, clear
varnish and other sprayable materials onto
suitable objects using compressed air.

4. Functional Description

SATAgraph 4 is connected by the air valve
[1-15] to the compressed air circuit. Press
the trigger down to activate the atomizing air.
Pull the trigger back to start applying materi-
al. The flow rate can be adjusted by the dis-
tance pulled back, depending on the setting
of the material flow control [1-18].

5. Scope of Delivery

■ SATAgraph 4 with nozzle 0.5
■ Material cup, depending on the version

6. Technical Design

[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
20
Safety cap
Needle cap
Air nozzle
O-ring for nozzle head
Plug for lateral material feed