SATA graph 4 Mode D'emploi page 19

vere injuries and even death.
2.1. Requirements regarding person-
nel
The SATAgraph 4 may only be used by
experienced skilled workers and instructed
persons who have thoroughly read and un-
derstood these operating instructions. Do not
use the SATAgraph 4 when tired or under the
influence of drugs, alcohol or medication.
2.2. Personal Protection Equipment
Always use approved breathing and eye pro-
tection, protective gloves and workwear when
using the SATAgraph 4 and during cleaning
and maintenance work.
2.3. Safety Instructions
Technical status
■ Check the functions and check for any
leaks every time before using the equip-
ment.
■ Never use SATAgraph 4 when damaged or
when components are missing.
■ Adhere to safety regulations.
Cleaning agents
■ Never use acidic or alkaline cleaning
agents to clean SATAgraph 4.
■ Never use cleaning agents based on halo-
genated hydrocarbons.
Connected components
■ Only use original SATA spare parts and
accessories.
■ The connected hoses and lines must
reliably withstand the thermal, chemical
and mechanical loads expected during
operation.
■ When pressurised hoses work loose, their
whip-like movements can cause injuries.
Always vent the hoses completely before
Operating instructions SATAgraph 4
EN
19