Manual Function - geo-FENNEL Geo6-XR GREEN SP Mode D'emploi

EN
SWITCHABLE
LASER LINES

MANUAL FUNCTION

If the instrument is in OFF position press the button MANUAL function to enter into the MANUAL
mode; the ON/OFF LED is illuminated, the MANUAL LED is blinking. Now the instrument can be
used in slope mode, the compensator alarm is off. All lines can now be switched as in standard mode.
Switch off the MANUAL function with the button MANUAL function
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions Geo6-XR GREEN SP can be used with
an optional receiver (not included in this kit).
Switch on the desired laser lines and press the button receivng mode at the laser (the LED for the
corresponding lines flashes).The selected laser lines can now be deteced by the receiver
(the visibility of the laser lines is weaker in this mode).
By use of the receiver the working range can be extended up to 60 meters. For more detailed inform-
ation please see the user manual of the receivers.
Press the button receiving mode again to quit this mode.
19