Manual Function - geo-FENNEL FLG 6X-GREEN Mode D'emploi

EN
SWITCH THE LASER LINIES
Power on the laser and press button H
to switch on/off the horizontal laser line.
Press button V to switch on the vertical
laser line V1.
Press button V once more to switch on the
vertical laser line V2.
Press button V again to switch on both
laser lines V1 and V2.
Press button V a fourth time = switch off
all vertical laser lines.
All laser lines switched on.

MANUAL FUNCTION

If the instrument is in OFF position press the button MANUAL function to enter into the MANUAL
mode; the ON/OFF LED is illuminated, the MANUAL LED is blinking. Now the instrument can be used
in slope mode, the compensator alarm is off. All lines can now be switched as described above. Power
off the MANUAL function again with the button MANUAL function.
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions FLG 6X-GREEN can be used with an
optional receiver (not included in this kit).
Switch on the desired laser lines and press the button receivng mode at the laser (the LED for the
corresponding lines flashes).The selected laser lines can now be deteced by the receiver (the
visibility of the laser lines is weaker in this mode).
By use of the receiver the working range can be extended up to 60 meters. For more detailed inform-
ation please see the user manual of the receivers.
Press the button receiving mode again to quit this mode.
15