geo-FENNEL Geo6-XR GREEN SP Mode D'emploi page 18

EN
D
OPERATION
Setting up the laser:
1. click the laser onto the 20 mm fix-height adapter and align it on the floor
2. click the laser onto the 20 mm fix-height adapter and fix it onto a tripod
3. set the laser onto the heigt adjustable platform and align it on the floor
4. fix it onto a tripod by means of the support rail
5. fix the magnets of the wallmount onto a magnetic surface (steel plate)
6. set up the laser in a hanging position by means of the hole of the wallmount
7 . conncet the laser to a column by means of the fixing strap
8. set up the laser on the floor direct
· Minimum laser plane distance to floor 8 mm
· Minimum laser plane distance to wall 6 mm
POWER ON
Power on the laser by turning the ON/OFF knob in position ON. The instrument is now ready for use.
An audible and optical (blinking lines) alarm indicates if the instrument was set up outside of the com-
pensator range. Set up the instrument on a more even surface.
To power the instrument off turn the ON/OFF knob back
to the OFF position. The instrument is now powered off.
NOTE:
During transport the ON/OFF knob (compensator lock)
must be set to OFF . Disregard may lead to damages of
the compensator.
18