Hilti VC 20H-X Manuel D'utilisation page 29

3 Description
3.1 Product overview
3.2 Intended use
The products described here are industrial vacuum cleaners designed for universal, commercial use. They
may be used for wet or dry applications.
Use of the product to clean down persons or animals is not permissible. Underwater use is not permissible.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials you will be working with and how these materials can be disposed of safely.
▶ Do not use the product for continuous, stationary operation in automatic or semi-automatic systems.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Use an anti-static suction hose in order to avoid electrostatic effects.
▶ Do not vacuum up objects or materials that could cause injury by piercing through the dust bag (e.g.
pointed or sharp objects).
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Comply with the accident prevention regulations applicable in your country.
Permissible applications:
With vacuum cleaners it is necessary to ensure an adequate rate of air exchange (L) in the room in
situations where the expelled air is returned to the room.
Comply with national regulations!
▶ Vacuuming up large quantities of dust from work with Hilti diamond grinders, cut-off saws, rotary
hammers and core drilling machines using dry-cutting core bits.
▶ Vacuuming up mineral drilling slurry from working with Hilti diamond core bits or Hilti diamond saws,
and liquids up to a temperature of max. 60 °C (140 °F).
▶ Vacuuming up oil and liquid media up to a temperature of max. 60 °C (140 °F).
▶ Wet and dry cleaning of wall and floor surfaces.
Additionally in the case of H-class vacuum cleaners:
▶ Suitable for vacuuming up dry, non-flammable, hazardous dusts of dust class H in accordance with
EN 60335-2-69.
▶ Always comply with the regulations of the country in which the device is used!
▶ Comply with the applicable national accident prevention regulations when working with H-class vacuum
cleaners.
▶ H-class vacuum cleaners must be serviced as necessary, but at least once a year, and if necessary
repaired, and tested by a person with expert knowledge. The test result must be produced on request.
*2326117*
1
2326117
Transport handle (extending)
@
Lashing loop for Hilti case
;
Carrying handle
=
Electric tool power outlet
%
Display and control panel
&
Blanking cover for wireless module (optional)
(
Control switch
)
Intake fitting (suction hose)
+
Container latch (2 of)
§
Supply cord
/
Securing hook (2 of) with rubber strap
:
Suction head
∙
Waste material container
$
Filter cassette with retainer (tool-specific)
£
English 23