Publicité
Les langues disponibles
Les langues disponibles
Dimensions of light spot
11
X
8,5
Illustr. 4
15500269
5
Mounting
5.1
Dimensional drawing
5.2
Mounting the sensor
Sensor alignment
Position sensor and screw to suitable holder, e.g. Typ MS F 50* or MSP F 50* (not included in standard delivery), via
fixing holes.
*Part number: see list of accessories
INFORMATION
Observe the following operating conditions:
• The distance to the object must be within the sensor's operating range (see technical data).
• The direction of movement of the object should be cross-wise to the sensor's front screen
(illustr. 7+8).
• With strongly reflective or shiny surfaces, incline the sensor by approx. 5 ° in relation to the
surface of the object (illustr. 9).
CAUTION
In the case of strong vibrations (shocks / oscillations), the sensor must be given constructive
protection from damage.
46
A
B
C
FT 50 RLA
A
B
C
D
X
D
All dimensions in mm (typical values)
Illustr. 5
15300716
FT 50 RLA Disctance sensor - GB - 068-13671 - 19.05.2016-12
Mounting and
operating instructions
70...
100...
30
70
100
170
1.5 x 3
1.5 x 3.5
1.5 x 3.25 1.7 x 3.9
29.4
32.5
220...
80
300
1.5 x 3.5
2 x 4.5
32.5
Illustr. 6
15300065
Publicité
