Télécharger Imprimer la page

GASLAND OTR1902 Instructions D'installation page 4

Four à micro-ondes à hotte intégrée

Publicité

Les langues disponibles

Les langues disponibles

02
DO NOT, UNDER ANY CIRCUMSTANCES, CUT, DEFORM OR REMOVE ANY
OF THE PRONGS FROM THE POWER CORD. DO NOT USE WITH AN EXTEN-
SION CORD.
Electrical Requirements
Product rating is 120 volts AC, 60 Hertz, amps and 1.55 kilowatts. This product
must be connected to a seperate and dedicated supply circuit of the proper
voltage and frequency. Wire size must conform to the requirements of the National
Electrical Code or the prevailing local code for this kilowatt rating. The power
supply cord and plug should be brought to a seperate and dedicated 15- to 20-
ampere branch circuit single grounded outlet. The outlet box should be located in
the cabinet above the microwave oven. The outler box and supply circuit should
be installed by a qualifed electrician and conform to the National Electrical Code
or the prevailing local code.
Damage—Shipment/ Installation
• If the unit is damaged in shipment, return the unit to the store in which it was
bought for repair or replacement.
• If the unit is damaged by the customer, repair or replacement is the responsibility
of the customer.
• If the unit is damaged by the installer (if other than the customer), repair or
replacement must be made by arrangement between customer and installer.
Parts Included
Hardware packet
You will find the installation hardware contained in a packet with the unit. Check to
make sure you have all these parts.
NOTE: Some extra parts are included.
1 (844) 538-7890
support@gaslandchef.com
Part
Quantity
Wood Screws
2
(1/4" x 2")
Toggle Bolts
(and wing nuts)
2
(3/16" x 3")
Part
Self-Aligning
Machine Screws
(1/4"-28 x 31/4")
Nylon Grommet
(for metal
cabinets)
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Quantity
3
1

Publicité

loading