Publicité
Les langues disponibles
Les langues disponibles
08
C. Determining wall plate location under your cabinet
Plate position flat bottom cabinet
Draw a vertical line on the wall at the center
of the 30" wide space. Tape the Rear Wall
Template onto the wall matching the
centerline and touching the bottom of the
cabinet.
Plate position-beneath recessed
bottom cabinet with front overhang
1 (844) 538-7890
support@gaslandchef.com
16-1/2"
EA.
Draw a line on the
back wall equal to the
depth of the front
overhang.
30" Cooktop
Plate position-beneath framed
recessed cabinet bottom
Draw a vertical line on the wall at the center
of the30" space. Tape the Rear Wall
Template onto the wall matching the
centerline and touching the bottom cabinet
frame.
Your cabinets may have decorative trim that
interferes with the microwave installation.
Remove the decorative trim to install the
microwave properly and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is
level.
If the cabinets have a front overhang only, with
no back or side frame, install the mounting
plate down the same distance as the front
overhang depth. This will keep the microwave
level.
1. Measure the inside depth of the front
overhang.
2. Draw a horizontal line on the back wall an
equal distance below the cabinet bottom as
the inside depth of the front overhang.
3. For this type of installation with front
overhang only, align the mounting tabs with
this horizontal line, not touching the cabinet
bottom as described in Step D.
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
30" Cooktop
Publicité
