Publicité
Les langues disponibles
Les langues disponibles
32
C2. Use top cabinet template for preparation of top cabinet
You need to drill holes for the top support screws and a hole large enough for the
power cord to fit through.
• Read the instructions on the TOP CABINET TEMPLATE.
• Tape it underneath the top cabinet.
NOTE : Adjust top template accordingly if the microwave is being spaced out
from the wall due to cabinet depth(including cabinet doors) of more than 13".
• Drill the holes, following the instructions on the TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
C3. Check blower plate
• Place the microwave in its upright position, with the top of the unit facing up.
• Check to see that the blower plate is correctly installed on the unit.
C4. Mount the microwave oven
1 (844) 538-7890
support@gaslandchef.com
Blower Plate
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
