Publicité
Les langues disponibles
Les langues disponibles
18
A3. Adapting microwave blower for outside top exhaust
5. Secure blower unit to microwave with the screw removed in Step 1. Make sure
the screw is tight.
6. Replace blower plate with the screw removed in Step 1. Make sure the screw is
tight.
7. Attach the exhaust adaptor to the top of the blower plate by sliding it into the
guides of the blower plate.
Push in securely until it is in the locking tabs. Take care to assure that the damper
hinge is nstalled so that the damper swings freely.
A4.Check for proper damper operation
Blower Plate
• Make sure tape securing damper is removed and damper pivots easily before
mounting microwave.
• You will need to make adjustments to assure proper alignment with your house
exhaust duct after the microwave is installed.
1 (844) 538-7890
support@gaslandchef.com
Adaptor
Guide
Locking Tab
Exhaust Adaptor
Back of
Microwave
Back of
Microwave
Damper
Back of
Microwave
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
