Publicité
Les langues disponibles
Les langues disponibles
24
To use toggle bolts:
3. Place the mounting plate against the wall and insert the toggle wings into the
holes in the wall to mount the plate.
NOTE: Before tightening toggle bolts and wood screw, make sure the bottom of
the mounting plate touch the bottom of the cabinet when pushed flush against
the wall and that the plate is properly centered under the cabinet.
CAUTION: Be careful to avoid pinching fingers between the back of the
mounting plate and the wall.
4. Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.
B4. Use top cabinet template for preparation of top cabinet
You need to drill holes for the top support screws and a hole large enough for the
power cord to fit through.
• Read the instructions on the TOP CABINET TEMPLATE.
• Tape it underneath the top cabinet.
• Drill the holes, following the instructions on the TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
1 (844) 538-7890
support@gaslandchef.com
Spacing for Toggles More
Than Wall Thickness
Toggle Wings
Mounting
Plate
Wall
Toggle
Bolt
Bolt End
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
