Publicité
Les langues disponibles
Les langues disponibles
16
17
A2. Use top cabinet template for preparation of top cabinet
You need to drill holes for the top support screws, a hole large enough for the
power cord to fit through, and a cutout large enough for the exhaust adaptor.
• Read the instructions on the TOP CABINET TEMPLATE.
• Tape it underneath the top cabinet.
• Drill the holes, following the instructions on the TOP CABINET TEMPLATE.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
A3. Adapting microwave blower for outside top exhaust
1. Place the microwave in its upright position, with the top of the unit facing up.
Remove the screw that holds the blower plate
to the microwave. Remove and save the screw
holding the blower motor to the microwave.
1 (844) 538-7890
support@gaslandchef.com
Blower Plate
Back of
Microwave
Blower Motor
Screw
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
