Publicité
Les langues disponibles
Les langues disponibles
30
C. Recirculating (Non-vented Ductless)
Installation overview
C1. Attach Mounting
C2. Plate to Walepare loop Cabinet
C3. Check Blower Plate
C4. Mount the Microwave Oven
C5. Install or change Charcoal Filter
Important note:
• Make sure the screws for the blower motor and blower plate are securely
tightened when they are reinstalled. This will help to prevent excessive vibration.
• Make sure the motor wiring has been properly routed and secured, and that the
wires are not pinched.
C1. Attach the mounting plate to the wall
Attach the plate to the wall using toggle bolts. At least one wood screw must be
used to attach the plate to a wall stud.
1 (844) 538-7890
support@gaslandchef.com
IMPORTANT: Do not remove the cardboard
spacers between the heat shield and door.
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Publicité
