Publicité
Les langues disponibles
Les langues disponibles
B1. Preparing the rear wall for outside back exhaust
You need to cut an opening in the rear wall for outside exhaust.
• Read the instructions on the REAR WALL TEMPLATE.
• Tape it to the rear wall.
• Cut the opening, following the instructions of the REAR WALL TEMPLATE.
B2. Remove blower plate
Remove and save the screw that holds the blower plate to the microwave. Lift off
the blower plate.
Blower Plate
B3. Attach the mounting plate to the wall
Attach the plate to the wall using toggle bolts. At least one wood
screw must be used to attach the plate to a wall stud.
1. Remove the toggle wings from the bolts.
2. Insert the bolts into the mounting plate through the holes
designated to go into drywall and reattach the toggle wings to
3/4" (19 mm) onto each bolt.
1 (844) 538-7890
support@gaslandchef.com
Back of
Microwave
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
23
Publicité
