Bimar KPT-2000B 5208LE Notice D'instructions page 21

•
The button on the remote control: selects the stop time of tha daily
program.
These functions are regulated with the remote control:
•
HOUR/MINUTES/DAY setting (appliance has to be on or in stand-by). Press the
, button, you should see the number "12" on the display, set the right hour
with the and the
number "30"on the display, set the correct minutes with the
button. Press the
correct day with the
d3=Wednesday; d4=Thursday; d5=Friday; d6=Saturday; d7=Sunday). Press the
button to confirm, on the display you can see the information set.
For example: 09.30 a.m., 3° day (Wednesday), 25°C, II power level.
Note: if the appliance is switched off or if the plug is removed from the outlet the
instructions are erased which mean they have to be reinserted.
•
TEMPERATURE regulation when the appliance is in function press the
the button, on the display you'll see the default temperature"23". Press the
and the
49°C): press the
For example:
with a room temperature of 15°C and set temperature
of 25°C, the display shows up like this.
If the room temperature is lower than the temperature shown on the display the
appliance stays in stand-by.
button. Press the
button, you should see "
and button. (d1=Monday; d2=Tuesday;
button to decide the right temperature ( between 10°C and
button to confirm.
button again, you should see the
" on the display, set the
21
and the
and or