Bimar KPT-2000B 5208LE Notice D'instructions page 19

To start the appliance insert the plug in the power grip: press the button on the side in
pos.I, this should light up on the display
start the appliance press the "
The appliance can be used in two different modes:
-Normal: power, temperature and time are regulated by the control panel and the
remote control.
-Weekly program: power, temperature and time are regulated and preset for the 7
weekdays, they are activated by the remote control.
If there is no preset for the temperature the appliance will work for 12 hours and then
go into stand-by.
Normal mode
L'apparecchio ha i seguenti elementi di regolazione e comando:
• Main switch(I/0) if it is in pos."I" the appliance is in stand-by, in pos. "0" the
appliance is off.
• The button "
ventilation and activates the other functions. It puts the appliance in stand-by. This
symbol lights up on the display "- -".
•
Oscillation for alternative "front-low" air direction: function is active, by
pressing the "
the button swing of the remote control.
•
The " "button on the keyboard and on the remote control: it defines power of
ventilation:
"I" (1000W): hot air
-
"I I" (2000W): very hot air
-
"- -" only ventilation
-
It lights up the symbol of the function activated on the display.
•
The button "
Is the timer when the appliance is on, every time
you press the button it extends the working time
of the appliance by one hour (max 12h), when the
time runs out the appliance switches to off
automatically. On the display appears the
selected time next this simbol
one of the active functions. To disable the timer
press the button repeatedly until " 00 " appears.
The picture shows the timer with "8 hours"
selected.
" button and select the right mode.
" on the keyboard and on the remote control"
" to the remote control. To delete the oscillation press again
"on the keyboard and on the remote control;
(it means the appliance is in stand-by) to
, beside the
19
": starts