Publicité
Les langues disponibles
Les langues disponibles
1.
Press the
2.
Press the
display shows" 23" (the default temperature) press
the
or the
temperature. The lights next to these symbols
°C, "I"e"II" should light up.
If the temperature goes down too quikly the program switches the appliance to
stand-by mode: press the
to disable the program: the corresponding light will shut-down and the appliance
works with the previous functions.
3.
When both "window sensor settings" and "weekly program" are active the
appliance is on when both functions are active and is off if the functions are
inactive.
To switch off the appliance, press the "
power outlet.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch off, unplug and wait for before it
has completely cooled down.
• To clean the body use a soft damp cloth; do not use abrasive products.
• Do not submerge any part of the heater in water or other liquids; if this should
happen, do not put your hands into the liquid, firstly remove the plug from the
power socket. Carefully dry the appliance and check that all the electrical parts
are dry: if in doubt, contact professionally qualified personnel.
• From time to time clean the grid to remove fluff, dust or other deposits, to
improve the performance. Use a vacuum cleaner or a cloth.
• If you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have disconnected
the plug from the socket) and make dangerous parts harmless if children are
allowed to play with them.
• Used battery of the remote control must be disposed of at appropriate collection
centres at your local authority or in suitable containers. In this way, local laws will
be respected.
button: the appliance switches on.
button to set the temperature: the
button to increase or decrease
button to start the appliance. Press the
,
" button, then eject the plug from the
23
button
Publicité
