Bimar KPT-2000B 5208LE Notice D'instructions page 18

Drill 2 perfectly horizontal
holes, with a distance of 39.5
cm and at least 215 cm from
the floor (to draw the holes
use the template obtained in
the lower
package).Insert
expansion dowel and drive in
screws with head havinga
8mm diameter, suitable to fit
in the slots (see figure on the
side)
•
Ensure that the power cord is correctly positioned and does not come into contact
with hot parts or sharp edges, or become wound around the appliance itself and is
not twisted.
•
In the event of a fault or malfunction, switch off the appliance and have it checked by
a qualified technician.
USO
The functions of this appliance can be started using they keyboard of the control
panel or the remote control which has to be pointed in the correct direction (at a max
distance of 4m); for the first use remove the plastic tab from the battery (N.1 battery
type: CR2025)
To sobstitute the battery move the
plastic tab to the centre and
simultaneously remove the battery slot.
Sobstitute the battery (following the right polarity) and close the battery slot. For
longer inactivity periods please remove the battery.
The remote control is divided in 3 areas:
flap of the
the
Area which contains the buttons for normal mode.
Area which contains the buttons to confirm the
selected mode.
Area which contains planning buttons.
18