Publicité
Les langues disponibles
Les langues disponibles
B. For the second stage
C. Regarding to the last
stage
4. Feeding not properly A.
too much wood pellet and
cannot burned in time
B. The fire is off due to
little wood pellet can be
burned
5 After ignition the power
is off 15min later.
It is normal
Feed unit is blocked.
There is the problem
about the connection
between motor and auger
No fuel in the hopper.
The level of feeding speed
is too high
The level of feeding speed
is too low
Pellet feeder unit is off, or
pellet is too little.
30˚C temperature switch
breaks or the connection
wires of switch loose.
Pressure Switch is broken
in the stove
79
Please be patient
Check the auger is blocked or not.
Check the fasten screw between
auger and motor loose or not.
Or the auger might jump
out
Fill the fuel into the hopper.
Adjust the combustion fan's speed
up or Feeding quantity
Adjust the combustion fan's speed
Down or feeding quantity
Check the pellet feeder unit and
restart.
Check the connection wires or
change the 30˚C temperature switch.
Replace or repair the device
Publicité
