Publicité
Les langues disponibles
Les langues disponibles
As soon as it reaches the desired temperature, the equipment will move to the
last stage, Stabilization.
At this stage, the stove turns on the fan that will deliver hot air to the
room and, depending on the power selected on the equipment, it will put
pellets into the burner with different time intervals (depending on the power
selected).
During any of the phases mentioned above, you can press the on/off button and turn off the device
without any problem.
From the moment that the equipment ignites or is in the shutdown phase and there is still a flame or
brazier, it is forbidden to disconnect the equipment from the electrical current.
To turn off the equipment, just press the key
hear a beep) and then the following message will be shown on the display:
From this moment on, the equipment will stop putting pellets in the
burner and will keep the fans in operation until the stove is at a safe
temperature (40 Cº).
As soon as this temperature is reached, the equipment switches off
completely, leaving the following message on the display:
!!ATTENTION!!
!!ATTENTION!!
for 4 seconds (until you
56
Publicité
