Publicité
Les langues disponibles
Les langues disponibles
Only from this moment on is the equipment properly switched off and then you
can disconnect the appliance from the electrical current.
Electric Current Failure
In the event of a power failure during the equipment operation, the flame will
continue to burn inside the chamber as long as there is fuel in the burner. As
soon as the electrical current is restored, the equipment will enter safe mode
and start the shutdown process.
If there is still a flame when the power returns and you do not want to wait
for the equipment to turn off before turning it on again, you can carry out the
following process:
Press the key
message will appear:
Then press the key
equipment will return to normal operation, showing the message on the
display:
for 4 seconds (until you hear the beep) and the following
for 4 seconds (until you hear the beep) and the
57
Publicité
