Publicité
Les langues disponibles
Les langues disponibles
Avoid too many changes of direction for the flue gas flow to the chimney. (e.g., too many
corners and bends).
Where you cannot connect directly to the chimney, if possible, use a connection piece with
cleaning opening.
For optimum efficiency please use the type of connector we recommend.
FLOOR PROTECTION
For flammable floor surfaces (wood, carpet, etc.) a glass, steel plate or ceramic underlay is
required.
SAFETY DISTANCES
(Measured from the outside of the stove)
From non-combustible objects
A > 400 mm B > 100 mm C > 100 mm
From combustible objects and to load-bearing walls in reinforced concrete A > 800 mm B
> 200 mm C > 200 mm
ELECTRICAL CONNECTION
The stove is supplied with an approx. 2 m long connecting cable with a plug. The cable must
be connected to a 230 V, 50 Hz electrical supply. The average electric power consumption is
approx. 150 watts during heating. During the automatic ignition process (duration 10
minutes) approx. 350 watts. The connection cable must be laid so that any contact with hot
or sharp-edged external surfaces on the stove is avoided.
49
Publicité
