Publicité
Les langues disponibles
Les langues disponibles
* Please plug in and check that all functions are working
* Remove stainless steel baffle filter and grease tray.
TOOLS AND MATERIALS REQUIRED
Pencil and tape measure
Wire cutter/stripper
Hammer
Level
Step ladder
Wire nuts
Pliers
Saber saw or Sawzall
Screwdrivers
INSTALLATION PREPARATION
120V 60Hz. 15 or 20 Amp, 2-wire with ground.
Properly grounded branch circuit.
(Not supplied)
Duct tape
Wrench
Keyhole Saw
Safety glasses
Electric or battery-operated
drill and 1/8", 3/8" bits
10" round metal duct,
length to suit installation
Metal Snips
Flashlight
Strain relief for joint cover.
Publicité
