Publicité
Les langues disponibles
Les langues disponibles
• Use a level to draw the cooktop centerline location. Draw the line to ceiling height.
• Use a level to draw the cooktop surface location.
INSTALL BACKSPLASH
Remove packaging
Place backsplash against the wall and match the centerline and cooktop surface
Mount the backsplash to the wall through the holes at top and bottom by using M3.5x30mm self-tapping
screws (2x at top,2x at bottom)
NOTE: Make sure screws are installed in vertical studs as much as possible
Install mounting bracket onto the wall
Remove packaging
Place mounting bracket against the wall, line up with the centerline and rest on top of backsplash.
Use M3.5x30mm self-tapping screws to fix bracket to the wall through the holes at top, middle, bottom
of mounting bracket (4x at top, 4x in middle, 4x at bottom)
NOTE: Make sure screws are installed in vertical studs as much as possible
INSTALLATION INSTRUCTIONS
Centerline
Centerline
Bracket mounting holes
Bracket mounting holes
Bracket mounting holes
Top of back splash
Cooktop surface
Publicité
