Publicité
Les langues disponibles
Les langues disponibles
INSTALL FILTERS
• Reassemble grease tray and baffle filters inside the hood.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and
standards.
Turn off electrical power at service entrance before wiring.
* If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially supplied with the hood.
* This hood must be ground. Do not remove ground prong from the plug.
To prevent the risk of fire, electric shock, or injury to persons, or for cleaning and maintenance such as
lubrication, unplug or disconnect the appliance from the power supply before servicing.
OPERATIONS
K1: Power button
When the range hood is on, press the K1 button to enter Power-Off Delay Timer, the Timer working
time is 15 minutes, the range hood will turn off when the time reaches 0. If you press the K1 button
again, the range hood will turn off.
When the range hood is off, press and hold the K1 button for 3 seconds to enter the clock adjustment
mode, press the K4 increase button and the K3 decrease button to adjust the hour, press the K1 button
again to adjust the minutes, also press the K4 increase button and the K3 decrease button to adjust
minutes.
K2: Light button
Press this button to turn on the light, and once again to turn off light.
K3, K4: Decrease button and Increase button
Press these two buttons to adjust the speed when the range hood is on and to adjust the time when the
range hood is in clock mode.
Publicité
