Télécharger Imprimer la page

WORMS ACCESS J36-50 Manuel D'utilisation page 35

Publicité

Les langues disponibles

Les langues disponibles

NOTE
Replace the oil as soon as it is contaminated (see the MAINTENANCE INSTRUCTIONS).
RECOMMENDED ENGINE FUEL
Prefer using Motul 4100 TURBOLIGHT 10W-40 or an SE class (API classification) equivalent oil or
an upper grade oil.
We recommend using SAE 10W-30 or 10W-40 oils, for general use and all temperatures. If you use
a single grade oil, select the correct viscosity for an average ambient temperature, depending on the
season [Fig. 05].
3.3. OIL SENSOR SECURITY
The Oil sensor security is designed to prevent engine damage caused by an insufficient amount of oil
in the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert system
will automatically stop the engine (the engine switch will remain in the "ON" position). If the engine
stops and will not restart, check the engine oil level before troubleshooting in other areas.
3.4. CHECK FUEL LEVEL (GASOLINE)
■ Never open the fuel tank cap when the engine is running or still hot.
■ Never fill the tank when the engine is running or still hot.
■ Do not refuel while smoking or near naked flame or other such potential fire hazards. Otherwise
fire accident may occur.
□ Always fill up the tank in the open air.
□ Do not overfill the tank. Leave enough space so that the fuel can evaporate.
1.
Always install the pump on a flat and stable floor;
2.
(ACCESS J 36-50 and ACCESS J 60-75): Close the tank valve before filling the tank up.
3.
Open the tank cap [Fig. 06];
4.
Control the fuel level (95 or 98 unleaded gasoline). If the fuel (unleaded gasoline) level is too low,
top up using the convenient fuel (unleaded gasoline) of the pump.
ACCESS J 8-25 / ACCESS J 14-40
ACCESS J 36-50 / ACCESS J 60-75
Fuel tank capacity (UNLEADED GASOLINE 95 or 98)
WARNING
1,6 L
3,6 L
F
EN
E
R
35

Publicité

loading

Ce manuel est également adapté pour:

Access j14-40Access j8-25Access j60-75